Modification of high-strength and high-modulus polyethylene fiber surfaces for the purpose of dyeing

ABSTRACT We investigated the dyeing properties of polysiloxane networks formed on high-strength and high-modulus polyethylene fiber after hydroxyl groups were introduced onto the fiber

surface by chemical treatment. Hydrogen peroxide in _o_-xylene emulsion in a volume ratio of 1:10 was emulsified by sonication. The emulsion was found to be effective for introduction of

hydroxide groups onto the fiber surface. The introduced hydroxide groups reached maximum levels by treatment for approximately 5 min at 80°C. The treatment did not influence the tensile

strength of the fiber. Utilizing a polysiloxane network in conjunction with the strong fiber surface formed by treating with 3-aminopropyltriethoxysilane (APS) solution, the dyeing

properties of an anionic dye, C.I. Acid Blue 25 was examined. The dyeing resulted in a bluish polyethylene fiber and the color depended upon the duration of treatment with the APS solution.

The method proposed in the present study can be used to dye a polyethylene fiber surface. SIMILAR CONTENT BEING VIEWED BY OTHERS BUFFER INDUCED IONICALLY CROSSLINKED POLYELECTROLYTE

TREATMENT FOR SELF-EXTINGUISHING POLYESTER Article Open access 25 January 2024 DYE REMOVAL MEMBRANE FROM ELECTROSPUN NANOFIBERS OF BLENDED POLYBUTYLENESUCCINATE AND SULPHONATED EXPANDED

POLYSTYRENE WASTE Article Open access 18 September 2023 STUDY ON POLYETHYLENE-BASED CARBON FIBERS OBTAINED BY SULFONATION UNDER HYDROSTATIC PRESSURE Article Open access 09 September 2021

ARTICLE PDF REFERENCES * J. C. Von der Heide and H. L. Wilson, _Mod. Plastics_, 38, 199 (1961). * K. Rossmann, _J. Polym. Sci._, 19, 141 (1956). * J. R. Hall, C. A. L. Westerdahl, A. T.

Devine and M. J. Bodnar, _J. Appl. Polym. Sci._, 13, 2085 (1969). * C. Y. Kim, J. Evans, and D. A. I. Goring, _J. Appl. Polym. Sci._, 15, 1365 (1971). * A. R. Blythe, D. Briggs, C. R.

Kendall, D. G. Rance, and V. J. I. Zichy, _Polymer_, 19, 1273 (1978). * D. Briggs, _J. Adhes._, 13, 287 (1982). * M. M. Kadash and C. G. Seefried, Jr., _Plast. Eng._, 41, 45 (1985). * F. C.

Schwab and M. A. Kadash, _J. Plast. Film Sheeting_, 2, 119 (1986) * M. Rasch and D. Briggs, in “_Adhesion_”, K. W. Allen, Ed., Applied Science, London, 1982, vol. 6, pp 111—120. Google

Scholar  * B. Westerlind, A. Larsson, and M. Rigdahl, _Intl. J. Adhes. Adhes._, 7, 141 (1987). * A. Anon, _Plastverarbeiter_, 38, 63 (1987). * L. Mascia and G. E. Carr, _Plast. Rubber

Process. Appl._, 9, 133 (1988). * G. E. Ealer, W. C. Harris, and S. B. Samuels, _J. Plast. Film Sheeting_, 6, 17 (1990). * H. P. Schreiber and F. St. Germain, _J. Adhes. Sci. Technol._, 4,

319 (1990). * A. Savolanien and J. Kuusipalo, _Tappi J._, 73, 133 (1990). * G. E. Ealer, S. B. Samuels, and W. C. Harris, _Tappi J._, 73, 145 (1990). * K. Bartos, _Przegl. Wlok._, 43, 417

(1989). * J. A. Lanauze and D. L. Myers, _J. Appl. Polym. Sci._, 40, 595 (1990). * M. Morra, E. Occhiello, L. Gila, and F. Garbassi, _J. Adhes._, 33, 77 (1990). * W. L. Wade, Jr., R. J

Mammone, and M. Binder, _J. Appl. Polym. Sci._, 43, 1589 (1991). * P. J. C. Cheppell, J. R. Brown, G. A. George, and H. A. Willis, _Surf. Interface Anal._, 17, 143 (1991). * S. Corn, K. P.

Vora, M. Strobel, and C. S. Lyons, _J. Adhes. Sci. Technol._, 5, 239 (1991). * D. F. Kagan and V. V. Prokopenko, _Plast. Massy_, 16, 39 (1991). * L. Dorn and W. Wahono, _Kunststoffe_, 81,

764 (1991). * R. Foerch, J. Izawa, and G. Spears, _J. Adhes. Sci. Technol._, 5, 549 (1991). * Z. F. Li, A. N. Netravali, and W. Sachse, _J. Mate. Sci._, 27, 4625 (1992). * B. Tissington, G.

Pollard, and I. M. Ward, _Composite Sci. Technol._, 44, 185 (1992). * G. A. George and H. A. Willis, _High Perform. Polym._, 1, 335 (1989). * S. Gao and Y. Zeng, _J. Appl. Polym. Sci._, 47,

2065 (1993). * S. Gao and Y. Zeng, _J. Appl. Polym. Sci._, 47, 2093 (1993). * D. N. Hild and P. Schwartz, _J. Adhes. Sci. Technol._, 6, 897 (1992). * M. Zenkiewicz, _Zesz. Nauk. Politech.

Slask., Mech._, 98, 130 (1990). * J. R. Brown, P. J. C. Chappell, and Z. Mathys, _J. Mater. Sci._, 27, 6475 (1992). * M. Osterhold and A. Wiechers, _Materialpruefung_, 35, 178 (1993). * Y.

Yao, X. Liu, and Y. Zhu, _J. Adhes. Sci. Technol._ 7, 63 (1993). * M. H. Hansen, M. F. Finlayson, M. J. Castille, and J. D. Goins, _Tappi J._, 76, 171 (1993). * C. M. G. Carlsson and K. S.

Johansson, _Surf. Interface Anal._, 20, 441 (1993). * Y. Chaoting, S. Gao, and Q. Mu, _J. Mater. Sci._, 28, 4883 (1993). * V. C. Della, L. Fambri, R. Fenner, C. Migliaresi, and A. Pegoretti,

_J. Mater. Sci._, 29, 3919 (1994). * W. S. Gutowski and E. R. Pankevicius, _Composite Interfaces_, 1, 141 (1993). * S. Sapieha, J. Cerny, J. E. Klemberg-Sapieha, and L. Martinu, _J.

Adhes._, 42, 91 (1993). * F. P. M. Mercx, _Polymer_, 35, 2098 (1994). * S. O’Kell, T. Henshaw, G. Farrow, M. Aindow, and C. Jones, _Surf. Interface Anal._, 23, 319 (1995). * D. M. Brewis, I.

Mathieson, and M. Wolfensberger, _Intl. J. Adhes. Adhes._, 15, 87 (1995). * I. Sutherland, R. P. Popat, D. M. Brewis, and R. Calder, _J. Adhes._, 46, 79 (1994). * P. Masse, J. P. Cavrot, P.

Francois, J. M. Lefebvre, and B. Escaig, _Polym. Compos._, 15, 247 (1994). * J. J. Ziccarelli, _Mod. Plastics_, 40, 125 (1962). * E. Piiroja and A. Dankovics, _Plast. Massy_, 7, 35 (1982).

* E. Piiroja and H. Lippmaa, _Acta Polymerica_, 35, 669 (1984). * E. Sheng, I. Sutherland, D. M. Brewis, R. J. Heath, and R. H. Bradley, _J. Mater. Chem._, 4, 487 (1994). * W. H. Schrader

and M. J. Bodnar, _Plast. Technol._, 3, 988 (1957). * M. J. Bodnar and W. J. Powers, _Plast. Technol._, 4, 721 (1958). * M. D. Anderson and M. J. Bodnar, _Adhesive Age_, 9 (Nov.), 26 (1964).

* D. A. Olsen and A. J. Osteraas, _J. Polym. Sci., Polym. chem. Ed._, 7, 1913 (1969). * P. Blais, D. J. Carlsson, G. W. Csullog, and D. M. Wiles, _J. Colloid Interface Sci._, 47, 636

(1974). * K. Saito, _Nippon Setchaku Kyoukaish_, 27, 302 (1983). * C. Fonseca, J. M. Perena, J. G. Fatou, and A. Bello, _J. Mater. Sci._, 20, 3283 (1985). * A. Chew, R. H. Dahm, D. M.

Brewis, D. Briggs, and D. G. Rance, _J. Colloid Interface Sci._, 110, 88 (1986). * M. Deyme, _J. Colloid Interface Sci._, 112, 183 (1986). * C. G. Golander and B. A. Sultan, _J. Adhes. Sci.

Technol._, 2, 125 (1988). * V. V. Arslanov, A. A. Cherezov, A. E. Chalykh, and V. A. Ogarev, _Vysokomol. Soedin., Ser: B_, 25, 437 (1983). * E. S. Turkina and E. D. Yakhnin, _Vysokomol.

Soedin., Ser: A_, 27, 643 (1985). * J. T. Simpson, _Radiat. Phys. Chem._, 25, 483 (1985). * K. Kato, _J. Appl. Polym. Sci._, 19, 951 (1975). * D. K. Owens, _J. Appl. Polym. Sci._, 19, 3315

(1975). * H. Fujimatsu, K. Iyo, H. Usami, and S. Ogasawara, _Composite Interfaces_, (in press). * H. Fujimatsu and S. Kuroiwa, _Colloid Polym. Sci._, 265, 747 (1987). * H. Fujimatsu and S.

Kuroiwa, _J. Colloid Interface Sci._, 123, 309 (1988). * H. Fujimatsu, S. Ogasawara, N. Satoh, K. Komori, and S. Kuroiwa, _Colloid Polym. Sci._, 267, 500 (1989). * H. Fujimatsu, S.

Ogasawara, N. Satoh, K. Komori, Y. Matsunaga, and S. Kuroiwa, _Colloid Polym. Sci._, 268, 143 (1990). * H. Fujimatsu, S. Ogasawara, and S. Kuroiwa, _Colloid Polym. Sci._, 268, 28 (1990). *

H. Fujimatsu, S. Ogasawara, and S. Kuroiwa, _J. Adhes. Sci. Technol._, 4, 35 (1990). * H. Fujimatsu, N. Satoh, S. Yamamoto, H. Usami, S. Ogasawara, and S. Kuroiwa, _Composite Interfaces_, 2,

117 (1994). * C. A. Finch, “_Polyvinyl Alcohol_”, John Wiley & Sons, Inc., London, 1973, pp 214—216. Google Scholar  * D. G. Kurth and T. Bein, _Langmuir_, 11, 3061 (1995). Download

references AUTHOR INFORMATION AUTHORS AND AFFILIATIONS * Department of Fine Materials Engineering, Faculty of Textile Science and Technology, Shinshu University, Hitoshi Fujimatsu, Mitsuhiro

Imaizumi, Nobukazu Shibutani, Hisanao Usami & Takashi Iijima Authors * Hitoshi Fujimatsu View author publications You can also search for this author inPubMed Google Scholar * Mitsuhiro

Imaizumi View author publications You can also search for this author inPubMed Google Scholar * Nobukazu Shibutani View author publications You can also search for this author inPubMed 

Google Scholar * Hisanao Usami View author publications You can also search for this author inPubMed Google Scholar * Takashi Iijima View author publications You can also search for this

author inPubMed Google Scholar RIGHTS AND PERMISSIONS Reprints and permissions ABOUT THIS ARTICLE CITE THIS ARTICLE Fujimatsu, H., Imaizumi, M., Shibutani, N. _et al._ Modification of

High-Strength and High-Modulus Polyethylene Fiber Surfaces for the Purpose of Dyeing. _Polym J_ 33, 509–513 (2001). https://doi.org/10.1295/polymj.33.509 Download citation * Issue Date: 01

July 2001 * DOI: https://doi.org/10.1295/polymj.33.509 SHARE THIS ARTICLE Anyone you share the following link with will be able to read this content: Get shareable link Sorry, a shareable

link is not currently available for this article. Copy to clipboard Provided by the Springer Nature SharedIt content-sharing initiative KEYWORDS * Dyeing * Polyethylene Fiber * Surface

Modification * Hydrogen Peroxide * Silane Coupling Agent * _o_-Xylene