Physics in the boot and shoe industry

ABSTRACT THE nineteenth lecture in the “Physics in Industry” series of the Institute of Physics was delivered by Mr. H. Bradley, director of the British Boot, Shoe and Allied Trades Research

Association, on May 23, on “Physics in the Boot and Shoe Industry”. A problem of first-rate importance in the boot and shoe industry is mensuration or anthropometry. How shall a foot be

measured in order to specify concisely and accurately its shape ? The industry has hitherto relied on the eye and skill of handicraftsmen of the old school; few of these now remain and there

is need for a scientific method of foot specification. A useful start has been made on this investigation, and experiments with the most recently designed foot-measuring instrument have

proved most successful. Measurements of the foot when stationary should be supplemented by a knowledge, either qualitative or quantitative, of the requirements of the foot in motion. As yet

very little is known in this direction and experimental investigations were planned several years ago. The proposed experiments are closely allied with physiological studies. More about the

change in conformation of the foot during walking is required. Further-more, in the case of normally healthy feet the arches of which have not broken down, there are three main points of

pressure, namely, under the heel, the inside joint or ball, and the outside joint; it is necessary to know how the body weight is distributed among these several points of support and how

this distribution changes during walking. For a material in common everyday use, leather has received little attention from physicists, particularly in Great Britain. The science of leather

has developed during the past thirty years mainly on the chemical side from the point of view of its manufacture. A line of investigation into the physical properties of leather, which has

been selected because there is a likelihood of its being profitable in two or three directions, is the reaction of leather to the influence of water both in the liquid and vapour state.

Access through your institution Buy or subscribe This is a preview of subscription content, access via your institution ACCESS OPTIONS Access through your institution Subscribe to this

journal Receive 51 print issues and online access $199.00 per year only $3.90 per issue Learn more Buy this article * Purchase on SpringerLink * Instant access to full article PDF Buy now

Prices may be subject to local taxes which are calculated during checkout ADDITIONAL ACCESS OPTIONS: * Log in * Learn about institutional subscriptions * Read our FAQs * Contact customer

support RIGHTS AND PERMISSIONS Reprints and permissions ABOUT THIS ARTICLE CITE THIS ARTICLE Physics in the Boot and Shoe Industry. _Nature_ 131, 756 (1933). https://doi.org/10.1038/131756b0

Download citation * Issue Date: 27 May 1933 * DOI: https://doi.org/10.1038/131756b0 SHARE THIS ARTICLE Anyone you share the following link with will be able to read this content: Get

shareable link Sorry, a shareable link is not currently available for this article. Copy to clipboard Provided by the Springer Nature SharedIt content-sharing initiative